[...originally posted at BenchJewelerCAD.com Wed Dec 07, 2022 5:40 pm ...]
I just ordered our first 3D scanner! We have gone with the Thunk3D JS300.
Thunk3D JS300 Hardware:
Item Specification Camera: Monochrome, 1.3mp * 2
Raster: DLP 1280*1080
Lens: 12mm/16mm/25mm lens optional
FOV: 80*60mm
Resolution: 0.06mm
Thunk3D JS300 Software:
Item Specification Function: Scan /Register /Wrap / Mesh Edit
Frame Accuracy: 0.01mm
Scan Speed: 1 F/S
Scan Ability: 5-80mm
Alignment: Feature align
Data Format: ASC/STL
Divided Model Scan: Yes
PC Requirements: Intel processor + Nvidia as main GPU+ Win 10 systems
Certifications: CE/FCC/WEEE
Public API: C++ interface
Thunk3D JS300 Shipping Information:
Item Specification Shipping Weight: 11.65 Kg/25.68 lbs
Shipping Package: 50*35*28cm
Included in Package: Scanner, cables, U-disk, Adaptor, Calibration Plate, Clip
Glossary of 3D Terminology
Side note: Read this If you are interested in learning an introduction into 3D Jewelry Scanner Manufacturing Origin.
Thunk3D JS300
-
Javier Odom Verified
- Forum Senior Journeyman
- Posts: 340
- Joined: Tue Aug 08, 2023 4:22 pm
- Location: United States of America
- Contact:
Thunk3D JS300
Last edited by Javier Odom on Wed Aug 09, 2023 10:40 am, edited 1 time in total.
Take care, and God bless.
Javier Odom - Walt's Jewelers
Javier Odom - Walt's Jewelers
-
Javier Odom Verified
- Forum Senior Journeyman
- Posts: 340
- Joined: Tue Aug 08, 2023 4:22 pm
- Location: United States of America
- Contact:
RE: Thunk3D JS300
[... originally posted at BenchJewelerCAD.com Fri Jan 27, 2023 9:04 pm ...]
We received our 3D jewelry scanner!
The software which came with the device is Jewel3D v2.0.
The scanner was getting too detailed of scans. This was mostly due to the spray we were using which caused the scanner to get tiny little bumps throughout the scan. The software provides a way to clean this up, which allows us to have print ready scans.
A great system. I would recommend this for any jeweler looking to scan small items into STL format.
We received our 3D jewelry scanner!
The software which came with the device is Jewel3D v2.0.
The scanner was getting too detailed of scans. This was mostly due to the spray we were using which caused the scanner to get tiny little bumps throughout the scan. The software provides a way to clean this up, which allows us to have print ready scans.
A great system. I would recommend this for any jeweler looking to scan small items into STL format.
Take care, and God bless.
Javier Odom - Walt's Jewelers
Javier Odom - Walt's Jewelers